Help spread the word / share us on your favorite social media networks

Facebook Twitter Reddit LinkedIn

Results 1 to 4 of 4

Thread: Noisey agitator/coupler?

  1. #1

    Default Noisey agitator/coupler?

    GE
    Model - whdsr209daww

    Is this not a little too noisy? Is it me, or does the agitator looks too lose? This sold yesterday, but I am concerned that it is making too much noise.

    http://youtu.be/vwtujwg8LQs

    Found the problem. As I feared the bearing ans seal is shot at the shaft. Not sure why it is not putting oil on the agitator like another I have does with almost no play in the shaft. This one has a good bit of play and just kind of wobbles. Wife said looks like something is missing. Told her I think that would be the bearings and seal.

    The agitator may have been cleaned before I bought it. It was disconnected when I got it, so I did not see it in operation. Looks like I would learn my lesson buying things without seeing them in operation.

    P.S. Got to checking. This one and the other one I mentioned getting oil on the bottom of the agitaor and on clothes are identical. Must be another weak link in the GE washers.
    Last edited by Boman; 10-23-2014 at 08:53 PM.

  2. #2

    Default

    does the agitator looks too lose?
    It does.

    Is this not a little too noisy?
    Not overly.

    As I feared the bearing ans seal is shot at the shaft.
    Good catch.

    Name:  Transmission-WH38X10002-00583756.jpg
Views: 45
Size:  63.3 KB TRANSMISSION & BRAKE ASSY

    jeff.
    http://www.applianceaid.com/
    Appliance Repair Aid

  3. #3

    Default

    Changed the tranny and tub and basket. Couldn't get the nut with my spanner wrench, so I just changed basket and all. I do not understand there is more of a gap between the tub ring and the cabinet than the other identical one has. The only difference in these washers is the lid switch from what I can see.

    I had measured the tubs as I did not know what size of the one I put in is. They measured the same inside, so I figured it was a super also. Slightly wider gap, so I don't know. It still does a super load okay.

  4. #4

    Default

    Couldn't get the nut with my spanner wrench, so I just changed basket and all.
    That works!

    jeff.
    http://www.applianceaid.com/
    Appliance Repair Aid

Similar Threads

  1. Noisey Whirlpool direct drive
    By Boman in forum Appliance Repair
    Replies: 9
    Last Post: 04-01-2018, 09:27 PM
  2. oily ge agitator
    By Boman in forum Appliance Repair
    Replies: 3
    Last Post: 10-13-2014, 09:19 PM
  3. whlpl agitator
    By Boman in forum Appliance Repair
    Replies: 2
    Last Post: 06-01-2014, 08:37 PM
  4. noisey hotpoint washer
    By Boman in forum Appliance Repair
    Replies: 8
    Last Post: 11-05-2013, 09:13 AM
  5. Kenmore Model 110. Motor Coupler
    By jreld in forum Appliance Repair
    Replies: 1
    Last Post: 01-02-2013, 09:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •