Announcement

Collapse
No announcement yet.

pass through window

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • pass through window

    hi, im looking to put an opening in the wall between the kitchen and the dining room .
    will i need to care about a load bearing wall ? if so how would i go about it
    are there different lengths of 2x4s i will need to cut for this opening?
    wiil i have to strengthen any part of the opening if it is a load bearing wall? header, lintel or something
    thanks rough

  • #2
    will i need to care about a load bearing wall ? if so how would i go about it
    Yes you need to care if it is load bearing unless the window is narrower than a stud space and don't intend to cut any studs. How would you go about what? determining if it is load bearing? If you don't know how then this is best left to an expert like an architect or structural engineer.
    are there different lengths of 2x4s i will need to cut for this opening?
    Yes
    wiil i have to strengthen any part of the opening if it is a load bearing wall? header, lintel or something
    Yes you will The opening will need to be framed the same as any other window opening in a wall.
    Here is a basic image of a window frame setup. Click for a larger image.

    Click image for larger version

Name:	windowframing.jpg
Views:	1
Size:	57.5 KB
ID:	10381
    Operation Overlord.

    Comment


    • #3
      It depends upon the size of the window you want to make there. Some other factors are also be in your mind. Is it the main wall or bearing the whole burden of the roof at that spot you want to drill!
      I think it is better to give some strong support there.
      Last edited by Alec; 11-22-2013, 01:40 AM.

      Comment

      Working...
      X