Announcement

Collapse
No announcement yet.

Appliance tip of the week - GE dryer disassembly help and tips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Appliance tip of the week - GE dryer disassembly help and tips

    Appliance tip of the week.

    GE dryer disassembly help and tips

    If your GE dryer looks like the one pictured below, we have some take apart/disassembly helps and tips.

    Click image for larger version

Name:	gedryer1.jpg
Views:	1
Size:	27.1 KB
ID:	3596

    Step 1: Remove the two hex head screws from the top rear corners of the control panel.


    Click image for larger version

Name:	gedryer2.jpg
Views:	1
Size:	6.5 KB
ID:	3597

    Step 2: Grasp the control panel sides, push it back, and roll it up and off. Carefully lay it on it's face on the top cover.


    Click image for larger version

Name:	gedryer3.jpg
Views:	1
Size:	10.5 KB
ID:	3598

    Step 3: Remove the five screws from the control panel cover. Disconnect the connectors from the control board and set the control panel aside.


    Click image for larger version

Name:	gedryer4.jpg
Views:	1
Size:	26.3 KB
ID:	3599

    Step 4: Remove the screws/rear cover plates from the top cover. Remove ground screw from the back right corner opening.

    Click image for larger version

Name:	gedryer5.jpg
Views:	1
Size:	11.0 KB
ID:	3600


    Step 5: Remove the two phillips head screws from the back corners of the top cover. Open the dryer door and remove the two screws from the front underside of the top cover.

    Click image for larger version

Name:	gedryer6.jpg
Views:	1
Size:	9.4 KB
ID:	3601

    Step 6: Grasp the front corners of the top cover, lift up, slide back and lift up. Hold the top cover with one hand, push the wiring harnesses through the openings and then set the top cover aside.

    Click image for larger version

Name:	gedryer7.jpg
Views:	1
Size:	11.7 KB
ID:	3602

    NOTE: To remove the front panel, remove the two screws from the top front panal corners, and disconnect all of the connectors at the door switch. Set the front panal aside.

    Motor & blower asm - Item Number WE17X23056

    Dryer drum drive belt - Item Number WE12M29

    Dryer idler pulley wheel - Item Number WE12X83

    Dryer drum rear bearing sleeve - Item Number WE1M462

    jeff.
    http://www.applianceaid.com/
    Appliance Repair Aid
Working...
X