Refrigerator Ice And Water Dispenser Not Working -tip of the week
The part(s) or condition(s) listed below for the symptom Refrigerator ice and water dispenser not working are ordered from most likely to least likely to occur. Check or each item, starting with the items at the top of the page.
Dispenser Control Board
The dispenser control board governs most of the functions of the dispenser system. If only one dispenser part is not working, it is probable that an individual part has failed. In this case, each of the dispenser components before ing the control board. If the entire dispenser system is not working, the control board is more likely to be at fault.
The dispenser es send voltage to the dispenser. If one of the dispenser es is defective, the dispenser will not work. To determine if a dispenser is defective, use a meter to each for continuity. If a dispenser does not have continuity, replace it.
The turns off the ice and water dispenser when the refrigerator is open. If the fails, the dispenser will not turn on. To determine if the is defective, use a meter to it for continuity. If the does not have continuity when activated, replace it.
Main Control Board
The main control board might be defective. However, the control board is rarely at fault for this problem. Before replacing the control board, first check all of the dispenser components. If none of the dispenser components are defective, consider replacing the main control board.
FreshFlow™ Produce Preserver refill. Produce preserver absorbs ethylene which slows the ripening process of many produce items. As a result, certain produce items will stay fresh longer, up to 25% longer.
Produce Preserver Starter Kit. Kit includes two packets and status indicator. This item helps keep produce fresher, longer. Produce preserver absorbs ethylene which slows the ripening process of many produce items.
Icemaker installation kit. Kit contains: 20 feet of copper tubing, one adjustable self tapping saddle valve, and two 1/4 inch compression adapters.