Washer

Washer

Results 1 to 2 of 2

Thread: Washer

  1. #1
    Join Date
    Dec 2017
    Posts
    1

    Default Washer

    Hello! Looking for more specific help with GE Hydrowave GTWN4259D1WS (top loader manufactured July 2014). Won’t spin or agitate, after heavy load of jeans. Fills up and drains water on various settings. Belt looks tight. Flashing red LED light (on motor) is 1 second on, 1 second off - so no error code. Does this narrow down to lid switch replacement as your best guess? Or does my heavy jeans load indicate more of a failed coupler issue? Not sure where to start spending repair money first.
    Thanks for any help!!

  2. #2
    Join Date
    Feb 2012
    Location
    Canada
    Posts
    2,671

    Default

    Hi,

    Lets try a reset first.
    To clear the error code, turn the washer off. Then disconnect power for about 20 seconds. Next, reconnect power then open and close the lid five or more times within 12 seconds in the first 30 seconds of power-up.

    Note: that after you clear the code the washer may go back to work. This may be temporary and sometimes it is a permanent repair. I recommend clearing the code and if the code reoccurs replace the part suggested.

    jeff.
    http://www.applianceaid.com/
    Appliance Repair Aid

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •